Hello all !
Here is the area to post any parts you have available for sale or trade, complete trucks for sale, or any parts you may need.....it's amazing what can be found just by asking.
Paul
 | Okay, I'll start things off by saying I'm looking for a decent center headliner for a 86" sleeper K100. Either the moulded foam or the Cyclolac version is fine as long as it's in really good shape. Also looking for a chrome Fuller 13 speed shift knob.
Cheers,
David |
Comment deleted at the request of the author.  | Hi all, I have tons, and tons of parts new, and used for the Aerodyne cabover. These parts will fit 1977 to 1984 trucks, parts for the inside, and outside. Many of these parts cannot be found anywhere. You name it, I pretty much have it. |
Comment deleted at the request of the author. | Hey John,
Yeah, I'm usually all over ebay but haven't seen any actual chrome Fuller knobs yet. Which one did you get? I have a knob suitable for a non-RTO tranny, but I need the more commonly found one with 1st gear in the far left bottom & Reverse far left top slot and three range postions (one is a splitter)
I've been looking at your pics and it looks like you found a really nice Aerodyne there. I look forward to seeing more photos soon!
cheers,
david
|
| Hey again John,
Forget what I just said...I just found an NOS knob to match my transmission and shift pattern...probably from the same guy you just picked on up from. Thanks for the tip! Isn't it nice to put all of our heads together?
cheers,
david |
Comment deleted at the request of the author.  | Hey all, I know of some Kenworth K100's that may be for sale, these are cabs only. I'm not sure of price but will find out if anyone is interested. There is one 86"cab and (2) 108" VIT. I will add photos of these trucks, remember these are cabs only though the pics show otherwise. |
| Hey MK,
Have you seen these cabs, do you know if by chance the center headliner is good in the 86" cab? If you have interior roof shots please post them along with the location and contact info.
John, I was very pleased to find that shift knob so thanks again for the heads up on the ebay listings!
cheers,
david |
| Hey David, Yes I have seen these cabs, I will go to the place today or tommorow and check for the center headliner and let you know, I'll get the contact info as well, plus the other K100 VIT pic which I haven't posted yet. Stay Tuned. |
Comment deleted at the request of the author. | Anyone have a supplier for the ribbed rubber floor mat material found in the non-carpeted trucks?
I'm also in need of a couple complete ash tray assemblies and original radio speaker grills if anyone has these?
Thanks,
David |
| Hi David, I used the ribbed flooring rubber material for my locker boxes that I got from Home Depot. It is located in flooring, and is actually a runner. It worked perfect for the locker box. There may be other choices from an automotive outlet though.
As for the ashtray assemblies, and the speaker grills, I might be able to help you there, I will have to do some digging. |
| Hey John,
I did get in contact with Dan but haven't spoken yet with him in person. He seems like a real character! Thanks again for the contact.
Thanks also for the catalog tip. The wide rib stiff looks like it might work so I'll see if they will send me a sample. Do you already have it on hand? I'm glad to hear you're going with the original type material in your restoration too.
Cheers,
David
Cheers,
David |
 | i have a 83 cab with red leather diamond tuck and some little int. stuff for parts.. would like to have hi-back cloth in blue to put in pass side have a tallidaga light brown or tan. what do you do about dash busted on corner by the air valves? need a blue knob for air valve any help will be appreciated! |
| Hi midnight man,
I posted some information for you in the new Technical Q & A section !
Paul. |
 | w923 wrote on Jan 4, '09, edited on Jan 4, '09 David,
I haven't got it yet...probably this spring. Sad part is...I have a good factory mat that came with the replacement cab we bought, but the stick hole doesn't line up with either stick on our 4x4. The factory mats didn't fit that well...anyway.
John |
| John
No problem. I requested samples from restoration specialties and should have them next week. I'll let you know what they look like. Too bad on the one you have not lining up though!
I spoke with dan the other night and he was very helpful, thanks again for that contact.
By the way, if you have any shots of the W900 you're restoring please send them to my personal email, I'd love to see the progress. I have a soft spot for the 900As anyway!
Cheers,
David |
 | 29ih wrote on Jan 19, '09 I need a couple of new, or good used Grakon 1000 cab marker lights for my K125. I have 3 good ones, but need 2 more, and can't find anything but LED's that I'd rather not use. Thanks, Tony Weston. |
| Hello Tony,
Welcome to the club.
Regarding the marker lamps, call Felix at Inland Kenworth in Los Angeles (the old JT Jenkins dealer) on (323) 278 4100 - he has 2 Grakon 1000s sitting on the shelf with real lamps.
The Grakons are still available to order but not for much longer. Get what you can while you can !
Remember the newer ones will potentially have screw mounting lenses and not twist style although the overall lens shape is identical.
Happy shopping,
Paul |
Comment deleted at the request of the author.  | 87kw wrote on Jan 29, '09, edited on Jan 29, '09 Midnight man if your still looking for passenger seat try union co. seating in n.j. there number is 1-908-241-4949 or the guys cell is 1-732-522-3886 hope this is helpful to you i used them a couple of years ago to redo my seats .the only thing is they don't put the emblem on the seats. hope this is useful to ya.the mans name there is Bruce. |
| thanks!! i will check him out. |
Comment deleted at the request of the author. | Thanks Paul, I'll call Inland KW tomorrow and see if they still have those Grakon 1000's Tony W. |
| David, I maybe interested in the head light assy's my email is 5westons@scrtc.com, Thanks, Tony W. |
| Hi Tony,
Sorry but lights are sold. I removed the post. Thanks for your interest though.
Cheers,
David
ps. I still have the bezels if you're interested? |
 | kwkid wrote on Feb 19, '09 ok guy here is a good one need to knew the where abouts of a truck
sn 288161i have called kenworth here in fl an inland kenworth in cali no one knews where she is i need this truck found yes its the other real bj truck i am in hopes is like pauls truck sitting in some ones yard
not the scrapyard so any one that can help please this truck needs to be found i want the truck but i would like to see paul get it as well seeing what he did to his movin on an bj truck he is the man for the job of restoring it so please contact me or his with any imfo you might have
bscarll@aol.com for me sagehornp@hotmail.com thats paul |
Comment deleted at the request of the author.  | My current wish list:
Gullwing bumper w/foglight and step cutouts
Lower horizontal grill surround piece
Older style cab ladders with short steps
Air tank(s) that mount below/on the side of battery box
Driver's side telescoping radio antenna (mounts just ahead of door)
Older style air cleaner cap
(2) Quarter fender rubber flap, black, with 'Kenworth' printed on it
(2) Chromed hand rails that mount to the exhaust stack/air cleaner piping framework
Thanks in advance
|
| Just curious about this for right know, but does anyone know if you can still get the mirrors that mount on the front cab corners under the windshield,(not on the mirror bracket itself).I always liked them and wanted to put them on my 74 but never got a chance. but someday I'm planning on getting another K-100 and would like to have them. just figured I'd ask. thanks guy's NICK |
 | Well I am new here my name is Brian. I am looking for the truck I owned a couple of years ago. The truck is a 1980 K100C I sold it to a guy in Kent City Missouri and I never kept in touch with him but I am hoping someone might be close to there. The truck was/is blue with a white band around the windshield it has a 3408 Cat in it. I will email pics to anyone that wants a pic |
Comment deleted at the request of the author.  | Does anyone have front brake drums for a 69 K121? They are the 5 hole style that the hub bolts outboard to. Axle is an FF901 Rockwell. |
 | Hi!
Accidentally found this site, my name is Bengt.
I have a 1991 K100 and drive it on once in a week basis. Mine has only just over 510.000 miles, came with a 4&1/4 CAT, 11 spd. It's in pretty good shape, but my helper driver hit the RH plastic skirt on something (that mysterious animal that didn't bleed or have hair;). i wonder if anyone carries parts like that?
Thanks! |
 | I have a 400 horsepower 3406 out of early 80's kw if anyone is interested. It is complete with roughly 70,000 on rebuild and ran good
when it was pulled, The truck was wrecked in the side.. |
Comment deleted at the request of the author. | Does anyone know where I can find a right front cab corner.? |
 | Parts needed: gullwing bumper, cabmate air ride setup, stock large white steering wheel with kw logo horn button, short ladders. battery box cover...anyone? |
 | irnmn wrote on Oct 17, '09 This is my '78 K100 that I'm trying to re-run the airlines and wiring to make it look clean enough for ADOT to pass, does anyone have any info on how to make all these lines look clean along the frame?
Thx Ken |
 | HI
I imports rucks to Norway.
i have a customer that wants a K100C Aerodyne. Tandem tracktor.
It must be 1980 or older.
Øystein Korsgard . Email . o.k@online.no www.usatrucks.no |
 | hey guys,im looking for a 8v71 natrual,as long as it runs.also if anyone knows of any pre 1970 352 petes for cab parts and a aluminum thinline bumper,also kw door parts with paddle handles.contact eric at peterbiltaustralia@live.com.au |
Comment deleted at the request of the author.  | Hey everyone!
I just found this site a few days ago and I am posting from work (will upload pics later).
I have a rare old Brockway that I would like to trader for a KW aerodyne. Any other collectors that would like to swap??? Thanks for all the cool threads. I have learned a lot about my FUTURE truck.
Bob |
| Afterthought: I am interested in the 1985 Liberty edition k100 aerodyne. Has anyone seen one/know where one is sitting/for sale??
The one's that are available on the internet are all the same truck (using the same picuture over again) and are NOT liberty editions.
Thanks
Bob |
 | I am really looking for a few parts for my 1972 k100c.i am looking for a good cab jack. i am also looking for 2 of the old 150 gallon tanks with the spouts.i would really appreciate it i am wanting to buy also 2 front aluminum wheels mounted on 24.5s thank you. daniel |
Comment deleted at the request of the author.  | I have '85 K100 aero cab & I did not find the vin number on a frame! anyone got idea where is it?? thanx. |
 | Looking for NOS cab interior parts and exterior chrome parts, glass etc.. for a 77 K100 daycab.
Thanks
Cody |
 | Hi All,
new guy here. I've just acquired a 92' K100, now I know its not a classic but I hope you dont mind me hanging around. It sure looks like I can learn A LOT from this site! |
 | new here. i have a 1981 k100 e. looking for a batt. cover for my truck any help please. |
 | if your looking for a battery box cover try your local kenworth dealer, i don't know what the cost but i have seen the same battery box on fairly new trucks, although it may have been a T-300 or similar vocational application. |
 | i found my vin no on top of frame near batterie box allso on the rear cab bracket where the cab locks in to the cab suspension if this helps |
| hello any body home? i put some new pics up some shows over the summer. |
| Nice pics - should be a great project. Keep posting the progress!
Cody |
| Paul,when are you going to reproduce the white steering wheel we all want i will definatly take 2 !! any one know where i can get 2 austrailian type air breathers for my kw 8" thank`s John o`Shea |
Comment deleted at the request of the author.  | dodgepaul wrote on Jan 23, '10, edited on Jan 23, '10 Hey newbie here, I have a 83 flattop double bunk. Cummins power 13spd.220 wbase. Truck is real clean but I need to replace the battery box cover. Its just about junk, Id like to dress it up as I would some other pieces. Does anybody know of a place or places where a guy can get parts and chrome for these trucks. I havent had much luck. My 900L is easy for patrs, but my K100 needs some stuff as well and is my true love for drivin. |
 | i am looking for the upper matress or a place to get one for the aerodynes. ive checked with my local kenworth dealer and no luck any info would be appreciated, thanks. |
| Looking for a set of NOS molded vent windows for a 77 K-100. Have the part numbers somewhere - will post later!
Thanks
Cody |
 | anybody wantin to buy a 1980 K100 ? its a realy nice truck 90% original(a lot of chrome and old school)stuff added on. contact willowcreekck@aol.com thank ya |
Comment deleted at the request of the author.  | I am looking for a air cleaner for 83 K100, mine is rusted out. I checked with my Kenworth dealer but they can't find one |
| Hi guys, been away for a while, but I have a bunch of parts that I am ready to unload. Some of the big ticket items are two old style VIT air ride seats that are fully restored, and in new condition. Also have a brand new in the box Aerodyne refrigerator with the power cords, also have the slide tray that it mounts on which is used but in excellent condition, can supply pictures.
Also have a new doghouse for a 1977 to 1984 Kenworth cabover. It is the length for a 108" inch cab, but could be cut down for an 86" cab.
I have tons of misc. stuff mostly for the Aerodyne like interior stuff for the Aerodyne, but have stuff that will fit in any of the C model cabovers.
Paul, and David can vouch for me, I have sold parts to both of them. Please free to e-mail me with your needs on parts. Thanks, Naseer
arlnepilot@hughes.net |
| v8detroit wrote on Mar 12, '10, edited on Mar 12, '10 hi Naseer,what colour are your seats need oxblood or brown for mine,also need a pair of unity spotlights s6 with the
mounting plate`s for the cab,any white steering wheel`s thank`s john o shea |
| Hi John,
The seats don't have cushions on them, I have a set that can be used as a pattern that your upholstery shop can use to make a new set. If you could, e-mail me, and I will e-mail you pictures of the seats, they look incredible. Thanks,
Naseer arlnepilot@hughes.net |
| hi Naseer ive sent you an email but thought i would leave you a message on here also. I'm am interested in the upper bunk latches you have for sale if you could get back with me on the price and how many you have thanks. |
 | johnpasko wrote on May 8, '10, edited on May 8, '10 While looking for some W-900 parts I need, I have by coincidence located a BRAND-NEW ENTIRE K-100 CAB (I think it's a 1970 or '71...have the details at my office...I'm at home right now), complete with internals. It's located in CA. The plastic is still on the bunk mattress and seats have never been sat in, etc. The outside is still in factory primer waiting for paint. I'm told it apparently was ordered as wreck replacement and never used. Sat in a warehouse for many years. I have printed photos sent snail mail to me by the owner. If interested, contact me for the details. |
Comment deleted at the request of the author. Comment deleted at the request of the author.  | I have a 1989 K-100, does anyone know where you can find used grills for them... they are so hard to find in good shape |
 | Hello All,
I just picked up a 79 big cab with small cam 350 with 100K on overhaul, 13 spd with 3:70's, new brakes, drums, and wheel seals on 50% virgin rubber and just starting to work on the old girl. The truck came with twin stacks and twin breathers that go to two canisters which seems to be kind of rare. I was told the truck came with a V12 Det. I'm sure I will have a lot of questions as I dive into the old girl but for sure looking forward to it.
Thanks Wade |
| Hello Wade,
Congratulations on your new toy !
Feel free to add a photo album here on the site too. Looking forward to seeing some detailed pictures.
Paul. |
 | kw515 wrote on Nov 5, '10 LOOKING FOR:
1972 Kenworth K100C Cab-Over painted (Gold-based Metallic) Olive Drab Green & White, Detroit Diesel V8 Silver (8V71 or 8V92),The frame,4-Bag A/R Susp.,Steer/Drive Axles was painted Light Olive Drab Green, 108" V.I.T. Flattop Double-Wide cab,200"+ Wheelbase,(10) Stud-Piloted Alum. Wheels,22.5 or 24.5 Tires,Green Vinyl V.I.T. Interior,Fuller RoadRanger RTO Transmission was a 10,13,15,or 18 Speed.
The 1972 Kenworth K100C Cab-Over that belonged to a Family friend,The description for the 1972 Kenworth K100C Cab-Over is from memory, ,The last known where-abouts that I was told by Family friend son that the 1972 Kenworth K100C Cab-Over was in a field along the interstate with a tree grown through the truck cab.Family friend son never specified what state the 1972 Kenworth K100C Cab-Over. |
 | Help! We just bought a 1984 Kenworth cab-over - we think it is a K100. We can't find the fuses - where are they?
Thanks for any help.
Joni |
| Hello Joni,
The fuses/circuit breakers are located on the panel that attached to the dash on the right side of the steering wheel - undo the 2 large phillips screws and the panel will fall forward and downward to reveal the goodies. There are also a couple of relays, flasher unit etc located within the right side dash housing - if you undo and hinge up the top right hand dash panel you'll see them mounted vertically against what is the left side of the glove box opening.
Good luck.
Paul. |
 | Hey everyone, I'm new to this site, I just picked up a 73 k123, 350 cummins w/ a 13 spd.i'm sure i'll have many questions but my first one is where to find a clear pic of the 50 th anniversary emblem? I read that the 73 had a gold and red emblem and mine is in need of serious restoration. A couple other things i need are of course the blue parking brake knob, the r/s storage compartment in the sleeper, i also would like to find a clear pic of a bunk curtain from late 60's early 70's w/ the white diamonds..i know it may not be original but it should be period correct? keep an eye on my multiply page for pics and video....thanks and great site
Terry |
 | can anyone tell me where you can find a dash for an 84 k100 |
 | i have a just bought a 1971 k100 13spd 8v71 in great shape to pull my lowboy with. it seem like a shame to use it for that. any interest in it before i put it to work next spring? i restore old mopars so i know it deserves better, but i also have a company to run. located in ND 701 820 0347 |
 | paradeduty wrote on Dec 15, '10, edited on Dec 15, '10 Just getting back to "tinkering" with what I call the "Baby HEMTT". She was built by TACOM (U.S.Army) as a prototype for the production 10 ton Heavy Expanded Mobility Tactical Trucks. As it was only intended to be a test bed for ideas for the new direction of the heavy trucks, the Army used a Kenworth K100 cab for it (circa 1975). I'm trying to get it as close as I can to its original state without getting insane. Finally the point - I am going to be in need of at least two (2) but I would not be against finding a complete set of five (5) cab roof marker/clearance lights either good take offs or NOS. The two in question had been removed for installation of a couple of flood lamps at the outside corners (thank goodness they didn't just hack in holes in the roof!). I will also be searching for a pair of original style air horns. The originals are still there but are showing their 35 years of dings and tree branches! There will no doubt be other stuff along the way, but these are the most obvious place to start. Thanks a lot for any help you can offer. Dave |
 | Can you still get parts for the k-100's? If so could you shoot me an email? stevied0408@yahoo.com, thank you |
 | 12v71 wrote on Jan 9, '11 Hello gentlemen. I have fallen on some hard times lately and am considering selling my '79 Aerodyne with 3408. I purchased it with full intention of restoring it. It is in great shape for its age. Drop a line if interested. price is negotiable. |
 | Hello ive got a 78 k100 single bunk with a 13 speed and a 400 cummins for sale email with any ?s @croberts@netins.net thanks clay |
 | what do you want for it ???? |
 | 1973 k-100 for sale 903 cummins project truck hate to cut up 609-698-7655 |
| johnpasko wrote on Mar 5, '11, edited on Mar 5, '11 I have a set of original gears and parts that will easily convert a Fuller RTO-9513 overdrive to a RTOO-9513 (double-overdrive) if anyone needs them. They are nearly new (takeouts).
Also looking for two...or at least one... original KW (approximately 1969 thru 1973 era) low-back bucket & trapeze-type air seats (cyclolac/fiberglass). Cushion condition not important. Can email me at: oceanjockey@sbcglobal.net
~John |
 | Have k100 e 1985 need battery cover.anyone have one? |
 | Please send me a e-mail . Would like to talk about patrs for sale, Thanks, Bill. bumpers61@aol.com |
| please e-mail me about parts, Thanks, Bill. |
| kw515 wrote on Mar 30, '11 LOOKING FOR:
1972 Kenworth K100C Cab-Over painted (Gold-based Metallic) Olive Drab Green & White, Detroit Diesel V8 Silver (8V71 or 8V92),The frame,4-Bag A/R Susp.,Steer/Drive Axles was painted Light Olive Drab Green, 108" V.I.T. Flattop Double-Wide cab,200"+ Wheelbase,(10) Stud-Piloted Alum. Wheels,22.5 or 24.5 Tires,Green Vinyl V.I.T. Interior,Fuller RoadRanger RTO Transmission was a 10,13,15,or 18 Speed.
The 1972 Kenworth K100C Cab-Over that belonged to a Family friend (Chuck Lewis),The description for the 1972 Kenworth K100C Cab-Over is from memory, ,The last known where-abouts that I was told by Chuck's son (Charlie Lewis) that the 1972 Kenworth K100C Cab-Over was in a field along the interstate with a tree grown through the truck cab.Charlie never specified what state the 1972 Kenworth K100C Cab-Over.
Contatct me by E-Mail or Cell phone
E-Mail Address is: fatherprofuel@yahoo.com
Cell Phone Number:(479)-644-5425 |
Comment deleted at the request of the author.  | Hi All, I'm looking for a cab jack for a '76 Aerodyne. Anyone have any ideas where I might find one or if parts are available to rebuild it?
Thanks,
Scott |
| Hi Scott,
No problem, the tilt pumps are still available manufactured by Power Packer. The Power Packer part number is AU15404-18 and this is for the air assist version, I don't have the part number for the non-air assist version to hand....though it is nice to just press a button and the cab pumps up nice and gradual.
This is available through KW dealers (KW part number is K188-208) still though cheaper elsewhere, just search for a Power Packer distributor in your area. I do recall that the air assist pump was cheaper than the non-air assist for some odd reason and I recall it was cheaper than I thought it would be too.
The pump is still used by Paccar on all those little Peterbilt trash trucks that run around every city.
You can search for seals etc and rebuild your own, but there is so much depending on the tilt pump, cylinders and lines, I would strongly recommend fresh new items if you can do it - most extensive cab damage is done when something in this system fails and the cab comes screaming down hard.....I know, mine needed new floors, tunnel, rear and side skins because of such a failure.
Sounds like you have a busy weekend ahead of you......
Paul. |
| Paul,
Thanks for the part info and the advice! I'll let you know how it turns out.
Scott |
 | anyone have bottom rubber trim
for double bunk
|
 | i have a 1976 k100 single axle for sale..got a shiny 290 cummins with a turned around 10 speed..truck runs and drives..in decent shape for the model..have pictures i can email..3000 takes it..best way to contact me is by phone..number is 276-768-9789 |
 | HI. I have got a cummins v903t out of a K125 right hand drive Australian model. Its a good runner w/ jake. Drop me a line if interested. regards, markw. |
 | 92sar wrote on Jun 23, '11 HI does anybody know where i'd be able to find a working extractor fan that mounts in the roof of an aerodyne,the complete unit would be good.Or are they as rare over there as they are here in australia |
 | I've got an 84 big bunk im parting out has great headliner I believe the rear drive axle is in gud shape if u need parts cal me at 5805251534 and we will see if I have what ur lookin for thanks
|
| Hi 92sar,
I've heard they are still available from jcwhitney.com. Try posting your question in the Technical Q & A section. I think Paul may know the part #.
Scott |
| on the 84 im partin out it has the head liner cablift cylinders front emblem on radiator cap door horns mirror brackets steering wheel switch panel pedals the center hump is gud passenger front cab corner in gud shape no head lite just cab parts available as of now thanks local pickup only on bigger parts |
 | Hello. I have a new factory Red Dot corp AC Grill densor for a K100 and a couple grill bars. Any interest? Thanks. |
Comment deleted at the request of the author. Comment deleted at the request of the author.  | I Also Am Looking 4 A Chrome 13 spd Shifter Knob Could I Get That Guys Contact Info? |
 | Hey Folks, This is Ryan have a 84 k-100 flattop looking for contact with interior and exterior replacement parts. my truck is in good shape and run it every day pulling a bullwagon and stepdeck . Truck was used bought as backup and was never used very much . Paint is a little faded on top but truck still gets comments daily. If anybody can help me out please email me at rglivestock@live.com . Located in Georgia. Your help is appreciated |
 | in need of the cab hinges for a 1989 k100 double bunk had the cab jack buckle on the lt side and mess up both cab hinges. any one have these. if so call me 910-417-8326
|
 | Where can I find new seals and packing for the cab lift cylinders? Thanks! |
 | I HAVE A 1985 110 INCH KW CABOVER, I AM REMOVING THE MOTOR, TRANS, REAR ENDS AND WHEELS AND TIRES. THE CAB IS AVAILABLE WITH THE DOORS AND MIRRORS, TWO BRAND NEW FUEL TANKS WITH SENDING UNIT AND STRAPS, IF THE FRAMES ARE NEEDED I CAN KEEP IT IN TACT. IF INTERESTED I CAN BE REACHED AT, RACMI9929@GMAIL.COM |
| ALSO I HAVE A NEW GULL WING FRONT BUMPER, IN THE BOX, ONE SIDE LADDER, TURN SIGNALS ETC. CONTACT RACMI9929@GMAIL.COM |
 | 42039 wrote on Sep 23, '11 Hi i am looking for a sleeper evaporator for a 1980 K-100 thank you. |
| 42039 wrote on Sep 23, '11 Hi my name is ryan i just sign up on the club i have'nt posted any pictures yet .I was just browsing threw and i saw you had some parts i been looking for maybe. i almost been everywhere looking for. what i'm looking for is a sleeper bergstrom a/c evaporator for a1980 K-100 if you can help that would be great. wichtner5@embarqmail.com. I also have some used parts if anyone is interested. thank you. |
 | kojsd wrote on Oct 5, '11 I am looking for a chrome air cleaner cap for my K100. kjibben@yahoo.com if somebody know of one or where to get one.
Thanks. |
 | rgcmc wrote on Oct 5, '11 I am looking for the cab tilt jack for my 1987 K100E |
 | Hey all !...new to the site and am gonna be needing some parts. Gonna need windshield on a 78 k-100 is the windshield 4 seperate pieces or what? Corner pieces in great shape but driver and passenger view has been subjected to little tommy two guns and his red ryder! Lemme know how much for parts and labor and if anyone has a spare...thanks.ryan aka( hambone) |
 | hello all, newbie to the club. i have an 1983 k 100 in primo shape, need some help with some parts though, looking for a texas front bumper, chrome battery box cover, chrome visor, rear fenders. if any of u have any of this that you wanna part with please let me know, my number is 8109692244, thanks jay
|
| im looking for the mirror brackets and wiper motors and a few other parts, where are u located at? contact me at jtippett@live.com . thanks |
 | For sale,1978 K100,108"cab on Cabmate air ride,3406PC (A model CAT)RTO-129513 trans,38,000#Eaton axles w/3:90 gears,on Air Glide 100 suspension w/all new bags and bushings, triple framed from cab back w/all new bolts,long slide 5th wheel,new air lines,control valves,brake chambers,to many other parts to list all,see pics on my profile,can contact me at dsnotlocker@gmail.com for more info. |
 | Im looking for a passenger side wiper motor. Any leads is appreciated. My number...(605)212-9032. Thank you in advance - Jason |
 | I would like to sell my 1993 Kenworth K-100. It has a Detroit 60 series and an 18 speed Road Ranger. It is in pretty good condition and could be restored quite easily. I live in Red Deer, AB, Canada. I would like to get $12,000 CAN. If anyone is interested, email me at rcnelson@shaw.ca. |
 | tbeau28 wrote on Nov 23, '11, edited on Nov 23, '11 I purchased an 89 KW100 a few years back for my son and I to restore but have come to the conclusion we don't have the time and am looking to sell it to someone who is interested in restoring it. I have a vision of how fantastic it would look when completed by just can't do it. Its powered with a 3406B CAT motor and a 9 speed transmission. My son still uses it occasionally to spot trailers in our shop in WI. I have pictures but can't figure out how to get them to this site.
If any interest e-mail me Terry@TLBCompanies.com |
 | stone57 wrote on Nov 26, '11, edited on Nov 26, '11 hi.looking for the main dash in the center which holds the parking brakes.the one in my truck is busted on the corner.the main frame work only that sits on top of the dog house.it is a 86 kw.thanks.j_3_stoneking@hotmail.com |
Comment deleted at the request of the author. | I have a lovely original heatshield from 1976 - it is the 9" diameter not the later 10". It is chrome plated steel in perfect condition. It has the rolled over edges that nothing after market has. If you have a single stack earlier K or W this is a great original part. It comes with a muffler (only 300 miles on it - 5" in & out), frame support U bracket etc and the original heatshield to support brackets.
Open to offers !
Paul at:
pjc56@earthlink.net |
 | Hey everyone, my husband shops custom truck accessories. He likes Mud Flaps because they're reasonably priced. Just a suggestion! |
 | Chrome Depot in Mantua, OH can get any bumper you need. |
 | We are in the Pacific Northwest...looking to purchase a K100 Aerodyne for a project...thanks!
dont427@hotmail.com |
 | I am looking for a 1980-1984 K100 double bunk flat top. Prefer cat power, and a 13-15 spd. e-mail is ricer0331@att.net
Paul |
 | There is one on truckpaper now, but look close at the pix it is a project ..It is cat powered..83 model in La.. |
| '85 double bunk flat top now on ebay...located in Georgia...425 Cat
dont427@hotmail.com
|
| I have a '81 K100 flat top 110" cummins B/C dual pipes and a 13spd. Truck is stock and has not been altered. Needs restoring but is all there. 4 bag air suspension. Runs but radiator leaks so it will need to be towed. I am looking for a Cat powered unit that is why I am selling. E-mail me at ricer0331@att.net for pics. I am asking 6500.00. |
 | If anybody has any "E" model parts kicking around, Let me know what you have. I am ALWAYS looking! !
Does anybody have or know where to get the KENWORTH "varashield" gauge? (2")
Thanks
Adam |
| Can you use a cut off AG 400 8 bag from a later year KW on a '84 K100? |
 | I have an 84 double bunk cabover-looking for center dash where the air valves go. |
| Hello, I have a 76 K100 with a 903 cummins and 13spd for sale, runs and drives, needs a little tlc but not bad. Email me and make a offer if interested!! Thanks, Linkss56@gmail.com. |
| If anyone is interested. I know of a '81 K100 110" Cat/13 spd. w/ torsion bar suspension for sale in LA, Ca. He wants low teens. Body is nice, interior needs work. |
 | I got 2 vt903 cummins motors for parts or rebuild new gasket kit shop manual motor mounts email me if needing any good motor parts i hate to scrap them! email polarbear2971@comcast.net |
| fatcab79 wrote on Jan 26, edited on Jan 26 Neal, I have a lower center dash. The one I have has tractor, trailer, charge brake valves, wiper controls, one air valve set up for diff lock which sits vertical, radio and pass air window controls. I also have all the parts to go with it. This panel is currently in my truck I'm changing it out for one with everything the same but two air valve controls so I will now have susp. dump also. Panel is in good shape, Panel only $35 + shipping. Want parts have to talk more. |
| Looking for a cabmate system for my '84. Does anyone have or know of one for sale? |
 | I have a 1978 K100 all original, minus the starter, altenator, and mattress (that was pretty nasty being over 30 years old).
I still drive it as a toy hauler but would like to find someone who'd like to fix er' up. What are these K100's valued at ? It has the big cam 350 and 10 sp trans. It spent most of its life hauling grain to the elevator and currently has 122,600 original miles. It fires up and drives beautifully. It would take very little work to get this truck back to a show room look.
|
| To those who had contacted me about my 83, the pic of her is the one on my profile, if interested send me tour offers, would like to sell her and the trains together |
 | cabinover looking for cab air ride parts for 89 k100 anybody point me in the right direction |
 | Hi guys im looking for the 70s to 80s style rubber trim that sits on the bottom of the cab on boath sides gray or silver if any one has a good pair. please email me if any one could help redman89892000@yahoo.com thanx. Terry |
 | Hi,
tjk911, I thought one of the guys here sell remanufactured lower rubber trim sets, have a look back through the posts.
mykw79, Have you still got any of the gasket sets for the 903's or shop manual. Geoff |
| CAN YOU SEND A PICTURE OR PROVIDE ME WITH YOUR PHONE NUMBER TO DISCUSS? THANKS.
NEAL |
| For inquires on 83 k100 train email to jtippett@live.com and I will send further information |
 | my low air pressure buzzer just quit working in my 82 k100. Can anyone tell me where it is in the dash,what it looks like,and what if anything else could stop it from working. |
| Hi tjk911 & rokwiz,
I did make a run of reproduction grey cab skirts though sorry to say the last available pair just sold.
Paul.
|
| k100kw,
The low air buzzer is located behind the right side dash, behind the heater control panel. Unscrew the right side hinged cover with the cigarette lighter and you'll should see 4 metal square/rectangular looking things....down there to the right side. You have a relay for the city electric horn, a relay for the clearance lights, the flasher unit (2 wires) for the indicators and lastly the low air buzzer - it has 2 wires and looks like a relay.
Presuming your low air light works, chances are the buzzer has failed -you can unplug the buzzer and shove 12 volts straight across it to check it. If the low air dash light is out as well as the buzzer I'd check the circuit breaker located behind the right side steering column panel - breaker #19 normally lower left side with two green wires on it - '18H' from ignition and '18' to the dash harness.
The '18' wire feeds two pressure switches screwed into the top of the two air distribution manifolds located under the dash just to the left of where you found all those relays and things I mentioned.
These two pressure switches are wired in parallel so low air pressure on either or both front & rear will kick on the dash light and buzzer. To save yourself some time digging around the breaker panel you can unplug the '18' green wire on each of the pressure switches, turn the ignition on and check you have 12 volts on them both with a test light or multimeter between the wire ends and a good ground point. If you do then the breaker is good, if not get into the breaker panel and change that breaker out (it's a 10 amp).
If you have 12 volts there you can disconnect the other wire off of each pressure switch and with a little jumper wire, link the hot 12 v feeds directly to the other wire, this should light the light or make the buzzer sound. If this jumping across works then one (doubtful both) of the pressure switches is bad. If not then it's it's back to the buzzer.
Hope this helps,
Paul. |
Comment deleted at the request of the author. | I have a set of rubber fender flaring I bought from Paul and I probably will not use them. Let me know if you are interested. |
| Still looking for a cabmate air ride for my '84. Can anyone help? |
| Neal,
Lower center dash. Yes I can post pic still in truck. You can email if you like
wbeck@rasmussengroup.com or 515-229-2147
Wade |
| Just stopped by the KW dealer by my house. While looking for dash parts they came up with the wood grain panel where the toggles go on '84 and up. New in the box. 360.00. I don't need it luckily, but holly cow is that expensive. |
 | I may be interested in buying those from you. Are they long enough for a 110"? email me at mbunton@comcast.net |
| Additionally I am looking for the ladder rails for my 77 along with other various items. |
 | I am a new be, I need the fender skirts, of you sold them how can I get pauls contact info. indianaviation@charter.net a fellow trucker Sunny |
| Hi there Sunny the trucker.
Welcome, This is a great website for anything Kenworth.
Geoff |
| A friend of mine made me a repro doghouse cover for my '84. It is spot on. If you are looking to have one done let me know. If you have a '85 and up he will need your old one for the pattern. He has the pattern for the long shifter only. If anyone knows where to get a KW logo heat stamp for door panels and seats please let me know. |
 | Hello Drivers: I am looking for a set of fender skirts, for my K-100C I need both Left and right. A fellow in Califprnia made 18 sets but there all gone, 817-894-1815 ask for Sunny |
 | Hey Everyone. I am looking for the long tall ladders for both sides of my 73. I am in southern Wisconsin. 608-335-2616 Dan |
 | I am looking for exhaust brackets for an 82 K100. I need the "U" shaped pieces that the muffler clamps go through to support the muffler and stack pipe. Any help would be very much appriciated.
Thanks, Chuck |
| Check CH Truck parts on line. |
| Thanks, I looked at thier site. Is amazing how many K100's they have. Am glad they arn't in North Carolina, I would be broke. |
 | Hi, I'm looking for any brochures or scans of K100 square headlight models 84-90's,mainly the Aerodyne model.
Any help or leads where I can find any literature appreciated...have had no luck on Ebay |
 | Hi club! I currently own an 87 k100e and I'm in need of a right side cab support bracket if anyone has one for sale please e-mail .......knickfan252@yahoo.com thanks!! |
 | do u have stainless steel air cleaner how much is it |
 | Hello I'm looking for info where I could find twin breathers for a 92 model. I either want the twin look or nothing but exhaust above the cab but I sure like the twin breathers
Thanks Tanner |
 | I am looking for a center dash for my 83? Mine has cracked and broke in a couple places so I would like to replace it. |
 | Hi. I am new here but I just bought a 84 K100 and I need some interior parts.The round warning lights(oil water,turn signal ect.basicly the whole set)Also would like to find original speaker covers.I need a good set of horns but I can probably find those around here.If anyone can help let me know.Also this truck has the air intake on the front by the grill but I would like to find the tubing to put it up by the stacks.thanks all |
| By the way this truck is a working project.I will be hauling with it as I work on it.It really don't need much but I will always be looking for something to make it look better.I will try to post some pictures later. |
| Looking for the center dash where the air brakes toggles etc are. The whole fiberglass housing. drivers side inside door handle. Also need grab rails, and the rear frame support at the very end of the frame. |
| Check either CH truck parts or CL chase in Wisconsin. i was there and he had a few '83's and '81's |
| Those are the same pieces Seagrave Fire Apparatus uses. we have them on our rigs. Call them. They should be able to get you replacements. |
| CH truck parts, or CL Chase. |
 | I'm looking for a passenger side ladder for my '81 Aerodyne. Round tube, flat, surrated steps. Thanks.
(Tried C&H Truck Parts already...don't have one...)
TommyZ1 |
 | I just bought a 74 k-123 ,engine locked up body in real good shape inside ok I going to junk it out anyone need any parts send me an email at sdtplus4@yahoo.com |
 | I have complete radiator and brand new air to air for 1989 k100 truck had cat motor and two 150 gal fuel tanks 715-864-6683 |
|
Kenworth K100 Club
Join this Group! Report Abuse***********************
'PHOTOS' Section Index
***********************
The Kenworth K100 Brochure & Literature Collection...........................
The Kenworth K100 Magazine Features, Roadtests and Advertisements.................
The Kenworth K100 Paint Schemes and Colour Code Manual..............................
The Shop Manual...............
Members' K100 Truck Albums..............................
***********************
'BLOG' Section Index
***********************
Technical Q & A.................
K100 Truck And Parts Wanted/For Sale Section......
|
My current wish list: